Shifnoid
Showing all 87 results
-
PC2010 DUAL OUTPUT CO2 ADJUSTABLE REGULATOR W/ GAUGES
$199.00Dual output regulator allows you to connect to one CO2 bottle and have two different output pressures. One side is adjustable from 0-150 PSI and the other side is adjustable from 0-400 PSI.
Includes two 1/4″ hose, 90-degree swivel, Push To Connect fittings. -
PC2042 2″ CO2 Bottle and 85 PSI Regulator
$159.9910oz. D.O.T. certified CO2 Bottle with valve and a Single Gauge. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
** OUT OF STOCK ** -
PC2082 2″ CO2 Bottle and 150 PSI Regulator
$169.9910oz. D.O.T. certified CO2 Bottle with valve and a Dual gauge, Adjustable 0-150 psi Regulator. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
** OUT OF STOCK ** -
PC750 Electric CO2 Shut Off Valve
$93.99Wires into ignition switch shutting off air supply to air components when not in use. Works with single or dual gauge regulators on low pressure side.
-
SN5072WS ALL ELECTRIC HEAVY DUTY 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
$699.99B&M Pro Ratchet (part number 80842) with a Shifnoid SN5072 Heavy Duty electric shift kit, makes a hands-free automated shifter for accurate and consistent shift points. Extra strength for hard to pull shifters sometimes caused by long shifter cables. New and improved for 2020, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. 12 and 16 volts compatible. A simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets.
-
NC6200 Bump Box
$199.99The addition of an Outlaw Bump Box allows for a smooth transition during the drag-strip staging process. Critical to cars that need to rev up before final staging such as turbo cars but also used by many non-turbo bracket racers. Being able to slide through the pre-stage beams and into the staged beams with precise tuning, cuts down on rocking, bumping and red-light starts. This box is easy to use. Simple adjustments can be made to accommodate different tracks, power levels, and rpms. This one-touch operation results in better focus, consistent launching, and better reaction times.
With the included relay the box will interrupt either the positive or negative wire on the Trans-Brake solenoid. When the Bump button is released ( not included ), it starts the timer, opens the relay, then closes the relay when the timer times out. The amount of time determines the “bump” distance.
-
PC3000 ENGINE LEAN OUT KIT
$79.99Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10' X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.
TEMPORARILY, air hose may vary in color. -
PC3100 ENGINE LEAN OUT KIT w / BRACKET
$94.99This model includes a heavy duty aluminum bracket.
Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake manifold or carburetor spacer with the included “Push to Connect” fittings, 10′ X 1/2″ Air line and Industrial grade Valve. 3/8″ NPT fittings can be adapted to existing ports if needed.
TEMPORARILY, air hoses may vary in color. -
PC4000 – AIR COMPRESSOR , 12 Volt
$389.99ELIMINATE YOUR CO2 BOTTLE AND REGULATOR
Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.
Includes a “No Kink” Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.
Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.
Compact size, approximately 10″ x 7″ x 4″ and net weight of only 10 lbs.
** OUT OF STOCK ** -
SN5070WS All ELECTRIC 3-SPEED SHIFT KIT REVERSE PATTERN W/B&M PRO RATCHET
$649.99B&M Pro Ratchet (part number 80842) with a Shifnoid SN5070 electric shift kit, makes a hands-free automated shifter for accurate and consistent shift points. New and improved for 2018, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevent accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets.
(CO2 version available – call 1-800-279-3724)ATTENTION: Not recommended for Ford C4 and C6 transmissions with full manual valve body with the line pressure set above 200 P.S.I.. These transmissions at high pressure create a load greater than these electric solenoids can handle. The best choice for these heavy-duty loads is the SN5072 Heavy-Duty electric kit or the SA4070 CO2/Air Kit.
-
SN5200WSMB 2-SPEED ELECTRIC SHIFTER W/SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
$679.99Side or Floor Mounting, ideal for dragsters and roadsters.
Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, solenoid, solenoid mount, and relay.
– Rear Cable Exit for P/G Transmissions
– Neutral Safety Switch
– Reverse Lock Out
– Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
– Includes P/G Shift Arm
– Includes 8′ Severe Duty Cable
– Optional 70469 Cable Bracket Needed for “Door Cars”
– Optional 80884 Mounting Bracket for Floor Mounting Shifter -
SN5250WSMB 2-SPEED ELECTRIC SHIFTER W/HEAVY DUTY SOLENOID AND BLACK PRO BANDIT SHIFTER (MAGNUM GRIP)
$699.99Side or Floor Mounting, ideal for dragsters and roadsters.
Hands-free automated shifting for accurate and consistent shift points. Solenoid mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes complete shifter package, heavy-duty solenoid, ideal for long cables, hard-to-shift transmissions, solenoid mount, and relay.
– Rear Cable Exit for P/G Transmissions
– Neutral Safety Switch
– Reverse Lock Out
– Includes B&M Magnum Grip Shifter & SHIFNOID Solenoid
– Includes P/G Shift Arm
– Includes 8′ Severe Duty Cable
– Optional 70469 Cable Bracket Needed for “Door Cars”
– Optional 80884 Mounting Bracket for Floor Mounting Shifter -
SW7010 TRANSBRAKE OR LINE LOCK SWITCH w/COIL CORD
$52.99Ideal for steering wheel mounting. Heavy duty, 18 AWG coil cord. Extends to 6 Foot. 15 AMP rating.
-
PC2004 CO2 REGULATOR, 85 lb. FIXED PRESSURE w/GAUGE
$84.99Single gauge shows bottle pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
-
PC2008 CO2 REGULATOR, ADJUSTABLE PRESSURE w/DUAL GAUGES
$89.99Dual gauge adjustable 0-150 lb, shows bottle and line pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
-
PC2020 CO2 Bottle, 10 OZ. WITH STANDARD VALVE
$89.99D.O.T. certified lightweight bottle with standard valve. 2″ diameter. “This bottle does NOT need re-certified every 1 or 5 years. The PC2020, 10 oz. CO2 bottle is D.O.T. exempt from periodic retesting.
** OUT OF STOCK **
-
Sale!
PC2030 CO2 BOTTLE, 2.5 LB. WITH STANDARD VALVE
$99.99DOT certified bottle with standard valve. 4 3/8″ diameter.
Quantity limited.
-
PC2022 CO2 BOTTLE, 10 OZ. WITH STRAIGHT VALVE
$89.99DOT certified lightweight bottle with lightweight straight-through valve. 2″ diameter.
** OUT OF STOCK ** -
PC2032 CO2 BOTTLE, 2.5 LB. WITH STRAIGHT VALVE
$129.99DOT certified bottle with straight through valve. 4 3/8″ diameter.
** OUT OF STOCK ** -
PC112 C02 BOTTLE RACKS
$46.49Safely store 2 standard 10 oz. bottles for transport. Non-marring individual bays keep bottles quiet. Measurements: 9″W x 9.5″H x 3.5″D. Weight: 1.2 lbs.(Wall Mount)
-
PC650 10oz CO2 Bottle Replacement Knob
$8.99Replacement knob for new style Sherwood Valve with male rupture disc. Mounting Hole dimensioned for 5/16″ valve stem.
-
CMW9100 THROTTLE STOP / STARTING LINE CONTROLLER
$287.49A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Standard bore cylinder for light-weight and compact fit. 2” stroke length.
-
CMW8900 THROTTLE STOP / STARTING LINE CONTROLLER
$297.49A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
-
CMW8925 THROTTLE STOP / STARTING LINE CONTROLLER
$317.49A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Air driven both directions, with a flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
-
CMW9125 THROTTLE STOP / STARTING LINE CONTROLLER
$243.99A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Standard bore cylinder for light-weight and compact fit. 2” stroke length.
-
CMW9000 THROTTLE STOP / STARTING LINE CONTROLLER
$248.99A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2” stroke length.
-
CMW9025 THROTTLE STOP / STARTING LINE CONTROLLER
$268.99A throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. A unique parallel adjustment lets you make easy, accurate RPM adjustment with no change to your linkage length. Remote mount solenoid for ease of mounting and light weight on your linkage. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram and fuel injected systems. 2.5” stroke length.
-
SN5000 ALL ELECTRIC 2 SPEED SHIFT KIT FOR MOST 2 SPEED SHIFTERS
$129.99Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, bracket, and relay.
SN5000FC Shift Kit – fits B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, and TCI Thunderstick with Front Exit Cable Shifter. Forward Pattern 2 speed only. Replacement solenoid for FC kit (SN3400).
SN5000RC Shift Kit – Fits Hurst Quarter Stick II with Rear Exit Cable
Replacement solenoid for RC kit (SN3410) -
NCRPM3000 RPM SWITCH W/DELAY
$119.99Prevent premature RPM Switch activation due to tire spin or converter flash off the starting line. An additional circuit in the RPM switch provides a 1 second delay in the activation of the RPM Switch. This delay feature only prevents the RPM Switch from activating in the first second. It cannot be used as a delay box. Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only. Single coil only.
-
NCRPM1000 RPM SWITCH
$104.99Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only. Single coil only.
-
PC2015 SHIFNOID STRAIGHT THROUGH VALVE FOR 10 OZ. CO2 BOTTLES
$45.99Replace your heavy V1 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
-
PC2017 SHIFNOID STRAIGHT THROUGH VALVE FOR 2.5 LB. CO2 BOTTLES
$45.99Replace your heavy V4 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
-
PC2000 PERMA-SEAL CO2 OUTLET SEAL
$4.99Perma-Seal provides a permanent seal for the connection between your CO2 regulator and bottle valve . No more leaks. No more plastic washers. Works with CO2 bottle valves that are internally threaded.
(photo is for example only – sold individually) -
PC2001 CO2 REGULATOR SEALS (pack of 5)
$6.99Replace the worn or missing seal between your CO2 bottle and Regulator (pack of 5).
-
PC1800 CO2 BOTTLE BACKUP AIR FILLER
$19.99Empty CO2 bottle? Ever run out of CO2? Fill your CO2 bottle with compressed air directly from your air tank or air compressor. Designed for the high pressures associated with CO2, this part stays permanently on your regulator, ready for immediate use. This unit eliminates the problems of home built units and the dangers of high pressure. Because your regulator prevents free back flow, trying to fill your bottle from the regulated side will not allow your bottle to fill completely. Putting a standard valve in the high pressure side will result in a dangerous, destroyed valve when you use CO2. This new BACK UP AIR FILLER solves all these problems. Uses your regulator to maintain the preset pressures. Use for unexpected emergencies or full time without last minute bottle or regulator modification. PICTURE SHOWN FOR EXAMPLE ONLY. BOTTLE, REGULATOR and GAUGE NOT INCLUDED.
-
PC550 CO2 BOTTLE MOUNT-BOTTLE TO ROLL BAR
$37.99Billet aluminum mount for standard 2″ diameter 10 oz. CO2 bottle. Mounts to roll bar to fit 1 ¼” to 1 ¾” tubing.
-
PC540 CO2 BOTTLE MOUNT – BOTTLE TO FLAT SURFACE
$69.99For 2.5 lb, 4 3/8″ diameter bottle. Polished CO2 Bottle Mount. Mounts to flat surface.
-
PC310 CO2 / AIR SOLENOID (3-WAY)
$79.4912 or 16 volt, Normally open or normally closed operation. Three 1/8″ NPT ports. One IN, one OUT and one EXHAUST. Manual override button. Power and Ground Lead wires. Used on most CO2 / AIR devices. 125 psi maximum.
-
PC410 CO2 / AIR SOLENOID WITH FLOW CONTROLS (4 WAY)
$134.9912 or 16 volt, Normally open or normally closed operation. Four 1/8″ NPT ports. One IN, two OUT and one EXHAUST. Individual flow controls for each OUT port allow you to contol the rate the air flows. Manual override button. Power and Ground Lead wires. Commonly used on Starting line controls and Throttle Stops. 125 psi maximum.
-
PC315 90 DEGREE SWIVEL FITTING
$8.99¼” pipe to ¼” hose quick connect. (actual product may vary slightly from image).
-
PC300 90 DEGREE SWIVEL FITTING
$8.991/8″ pipe to ¼” hose quick connect (actual product may vary slightly from image).
-
PC290 STRAIGHT FITTING
$7.991/8″ pipe to ¼” hose quick connect. (actual product may vary slightly from image)
-
PC295 STRAIGHT FITTING
$7.99¼” pipe to ¼” hose quick connect.(actual product may vary slightly from image)
-
PC275 “T” 1/4″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99Connect to your CO2 regulator to run two devices on the same bottle.
-
PC280 “T” 1/8″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99Connect to your CO2 regulator to run two devices on the same bottle.
-
PC125 CO2 LINE KIT
$24.9910 ft of 1/4″ OD high pressure CO2 line with (1) 1/4″ NPT to 1/4″ quick disconnect & (1) 1/8″ NPT to 1/4″ quick disconnect fitting
-
PC130 CO2 LINE
$26.9920′ of 1/4″ OD high pressure line. Designed for use with “Quick Disconnect” fittings.
-
PC100C PRESSURE RUPTURE DISC, FEMALE FOR CO2 BOTTLE VALVE
$19.99Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 13/16″ wrench flats (CHROME). Acceptable replacement for PC100.
-
PC110 PRESSURE RUPTURE DISC, MALE FOR CO2 BOTTLE VALVE
$12.99Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 5/8″ wrench flats.
-
SW9000 COIL CORD
$25.99Black 18 gauge, 2 wire for use with one switch. Extends to 6 foot. 15 AMP rating.
-
SW8100 POWER DISTIBUTION BLOCK
$42.99Ideal to connect to your main power supply or ground and distribute to eight stainless steel terminals. 3/8″ post. Rated at 48 volts DC. Base is glass filled nylon. Mounting is 2.5″ center to center.
-
SW7300 LARGE BUTTON TRANSBRAKE SWITCH WITH .03 ADJUSTMENT
$76.99This large button, easy-to-feel switch has an adjustable delay to meet your needs, and it is ideal for classes of racing that prohibit a delay box. Switch allows for up to .03 second delay. A 7/16” hole size is required for mounting.
** OUT OF STOCK ** -
SW7200 TRANSBRAKE SWITCH .03 DELAY ADJUSTABLE
$73.99Transbrake switch with extra long adjustable travel. This switch is infinitely adjustable and can delay reaction up to .03. Useful in classes that do not allow delay boxes.
** OUT OF STOCK ** -
SN5275 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (BLACK POWDER COATED SOLENOID)
$169.99This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED) -
SN5250 HEAVY DUTY 2-SPEED SHIFT KIT FOR B&M PRO BANDIT (YELLOW ZINC, GOLD COLORED SOLENOID W/BLACK DECAL)
$159.99This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift.
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED) -
SN5200 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$149.99Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED) -
SN7000 ALL ELECTRIC 2-SPEED SHIFT KIT, HEAVY DUTY (SOLENOID)
$179.99This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift. This specialty unit can replace the SN5000FC and SN5000RC if necessary for your application. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables and Hurst Quarter Stick II with Rear Exit Cable. Aluminum shifter cover will not work with this model. On Hurst Quarter Stick II, neutral safety switch has to be trimmed.
-
SN7600 OVERSIZED HEAVY-DUTY SOLENOID
$169.99This oversized solenoid produces the extra force necessary for heavy-duty applications and hard-to-shift shifters and transmissions. Ideal for shifters with extra-long cables that make them hard to shift. This specialty unit can be a substitute for the SN5000FC and SN7000. The aluminum shifter cover will work with this model. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables.
-
SN6000 2-SPEED SPRING SHIFT KIT FOR MOST 2-SPEED SHIFTERS
$149.99Solenoid / Spring shifter activator. Electric activated shifters give you consistent, hands fee shifting. Low amperage draw, spring activated shift kit for 2 speed transmissions. Mounted to your shifter, the bracket works with B&M ProStick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cable, and Hurst Quarter Stick II with Rear Exit Cable. Connect to your RPM Activated Switch or Timer for reliable shifting.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY ** -
SN5070 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$319.99Convert your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. New and improved for 2018, now features a heavy duty stainless steel bracket that makes for faster, easier installation. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets. (SHIFTER NOT INCLUDED)
ATTENTION: Not recommended for Ford C4 and C6 transmissions with full manual valve body with the line pressure set above 200 P.S.I.. These transmissions at high pressure create a load greater than these electric solenoids can handle. The best choice for these heavy-duty loads is the SN5072 Heavy-Duty electric kit or the SA4070 CO2/Air Kit.
-
SN5072 HEAVY DUTY 3-SPEED REV SHIFT KIT FOR B&M PRO RATCHET REVERSE PATTERN
$359.99This Heavy Duty version of the original SN5070 is designed for hard shifting shifters. It also features a redesigned bracket for easier installation.
Converts your B&M Pro Ratchet (part number 80842) to a hands-free automated shifter for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes Heavy Duty solenoid, safety switch, relays, handle attachment and brackets.
(SHIFTER NOT INCLUDED) -
SN5055 ALL ELECTRIC 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$299.99Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to your shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay.
(SHIFTER NOT INCLUDED) -
SN5057 ALL ELECTRIC 3-SPEED SHIFT KIT, FORWARD SHIFT PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$299.99Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to B&M Pro Stick or Hurst quarter Stick shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay.
(SHIFTER NOT INCLUDED) -
SN4200 ALL ELECTRIC 2 SPEED STANDARD PATTERN SHIFT KIT FOR TURBO ACTION CHEETAH SCS SHIFTER
$179.99Hands-free automated shifting for accurate and consistent shift points. NO CO2 Bottle and Regulator needed. Wire into any RPM Switch, Push Button or Timer. Kit includes HEAVY DUTY solenoid for extra hard hitting, Stainless Steel Bracket and Heavy Duty relay. Easy Installation. Made in the U.S.A. (SHIFTER NOT INCLUDED)
-
SA4000 CO2 2-SPEED SHIFT KIT FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$129.99Hands free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 shift. Includes cylinder, solenoid, bracket, airline and fittings. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
-
SA5400 CO2 2-SPEED SHIFT KIT FOR B&M PRO BANDIT
$149.99Hands- free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 shift. Includes cylinder, solenoid, airline and fittings. A CO2 bottle and regulator is a required option.
(SHIFTER NOT INCLUDED) -
SA4055 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN FOR B&M PRO STICK, TCI OUTLAW / THUNDERSTICK OR HURST QUARTER STICK
$359.99Hands-free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 and 2-3 shift. Simple conversion to Shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, CO2 cylinder, handle attachments and adapters and bracket. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
-
SA4070 CO2 3-SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$359.99NEW AND IMPROVED FOR 2020. Laser-cut Stainless Steel bracket that makes this kit stronger and easier to install than the previous model. Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift, without inhibiting your ability to shift manually. Simple circuit prevents accidental activation from park or neutral into gear. Includes cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. A CO2 bottle and regulator is a required option. (SHIFTER NOT INCLUDED)
-
SA4075 CO2 2, 3, OR 4-SPEED SHIFT KIT, STANDARD FORWARD OR REVERSE SHIFT PATTERN FOR B & M PRO RATCHET
$559.99Convert your B & M Pro Ratchet (part numbers 80842, 80843, 81120, 81119) to a hands-free automated shifter for accurate and consistent shift points. Extra power, ideal for hard to shift transmissions. The cylinder-operated shifter makes your 1-2 shift for a 2-speed and your 2-3, and 3-4 shift for your 3 or 4 speed transmission without inhibiting your ability to shift manually. Included “Elite RPM Switch” prevents accidental activation from high gear into neutral, even if engine returns to shift RPM. Safety Switch prevents inadvertent activation from park or neutral into gear. Includes Digital Delay #1067 RPM Switch, cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets. Can be converted to a reverse shift pattern if your transmission changes. A CO2 bottle and regulator is a required option.
OPTIONS AND THINGS TO CONSIDER:
- Any forward pattern transmission using this kit MUST be controlled by a smart RPM switch, which is included in the SA4075 kit.
- If you have a reverse pattern transmission, order the SA4070 which can be controlled by any RPM activated switch.
- If you already own a smart RPM switch, that can be programmed to limit the number of shifts, you can buy this kit without the RPM switch by ordering a SA4070, and moving one airline, which converts it to a forward pattern. (SHIFTER NOT INCLUDED)
-
SA4080 CO2 3-SPEED SHIFT KIT, REVERSE PATTERN, FOR TURBO ACTION CHEETAH SCS SHIFTER
$219.99Convert your Turbo Action Cheetah SCS Shifter to a hands free automated shifter for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift. Includes cylinder, solenoid, airline, fittings and brackets. A CO2 bottle and ADJUSTABLE regulator is a required option.
(SHIFTER NOT INCLUDED)- SA4080 Shift Kit – Fits Turbo Action Cheetah SCS Shifter Ford and Chevy Reverse pattern 3 speed only.
- SA4080M Shift Kit – Fits Turbo Action Cheetah SCS Shifter Mopar Reverse Pattern 3 speed only.
-
SN8800 THROTTLE STOP / STARTING LINE CONTROLLER, DUAL DIRECTION, ADJUSTABLE
$219.99A dual controlled and double adjustable throttle stop or starting line controller that allows you to make RPM adjustments without removing the unit from your carburetor. Air driven both directions, with a unique flow control adjustment that allows you to control the opening and closing rate of the cylinder. Large bore cylinder increases strength for hard to pull linkages, such as tunnel ram. Solenoid is remote mounted for lighter weight on your linkage. Air line and fittings included. 2″ stroke length.
-
SN8000 THROTTLE STOP / STARTING LINE CONTROLLER
$157.49The release of a button controls your throttle from a designated pre-set launch RPM to full throttle, all while the gas pedal is on the floor. You can launch with a transbrake or line lock button and the starting line RPM can be set as low as idle. Works with all ignitions, carburetors, and fuel injection systems. 2″ stroke length.
-
SN3875 30/40 AMP RELAY 12/16 VOLT SPDT
$11.49High current relay actuates accessories that draw high current. 12/6 volt DC single pole / double throw.
-
SN3885 60/80 AMP RELAY 12/16 VOLT SPDT
$12.99High current relay actuates accessories that draw high current. 12/16 volt DC single pole / double throw.
-
SN3850 20/30 RELAY 12/16 VOLT SPDT
$11.49High current relay actuates accessories that draw high current. 12/6 volt DC single pole / double throw.
-
SN3750 REPLACEMENT SOLENOID FOR SN5200 2-SPEED B&M PRO BANDIT
$99.99SN3750 replaces solenoid on a SN5200 electric 2-speed shift kit for B&M Pro Bandit. This replacement solenoid requires components from the original SN5200 shift kit. This is NOT a stand-alone unit.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3410 REPLACEMENT SOLENOID FOR SN5000RC HURST QUARTER STICK II WITH REAR EXIT CABLE
$99.99Replaces solenoid on a SN5000RC for Hurst Quarter Stick II with Rear Exit Cable.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3400 REPLACEMENT SOLENOID FOR SN5000FC 2-SPEED
$99.99Replaces solenoid on a SN5000FC shift kit for 2-speed forward pattern.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3050 REPLACEMENT SOLENOID FOR SN5055 REVERSE PATTERN 3-SPEED
$103.99Replacement Solenoid for SN5055.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
SN3000 REPLACEMENT SOLENOID FOR CMW 2-SPEED SHIFTER
$93.99Replaces solenoid on a SN5100 (electric 2 speed shifter).
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
-
NCRPM4000 ADJ-A-CHIP
$27.99Adjustable RPM Chip. Plug in RPM module works with most ignition controls including MSD and Shifnoid, and is adjustable from 1,000 to 11,000 RPM with the turn of a screw.
-
NC5300 UlTRA SHIFTER CONTROLLER
$149.99When used with 2 RPM switches, it will allow you to shift at 2 different RPM settings. Solves the problem of a RPM level that does not drop off between shifts, preventing your RPM switch from shutting off and resetting itself for the next shift. This is a common problem if you shift before your converter is locked or your tires are spinning, such as mud racing. These situations allow the RPM level to continue to climb instead of dropping off after the shift. Built into the controller is a RF Filter and Voltage Regulator to increase the reliability and accuracy of the RPM switches and a lock out switch to prevent the unnecessary reactivation of your shifter, once the transmission is in high gear. The controller can be wired for 1 or 2 shifts when used with 1 or 2 RPM switches.
** OUT OF STOCK ** -
SN3600 REPLACEMENT SOLENOID FOR SN5070 B&M PRO RATCHET REVERSE PATTERN 3-SPEED
$99.99Replacement Solenoid for SN5070 for B&M Pro Ratchet Reverse pattern 3 speed.
** LIMITED INVENTORY, CALL FOR AVAILIBILTY **
