CO2 Bottles & Accessories
Showing all 35 results
-
PC2010 DUAL OUTPUT CO2 ADJUSTABLE REGULATOR W/ GAUGES
$199.00Dual output regulator allows you to connect to one CO2 bottle and have two different output pressures. One side is adjustable from 0-150 PSI and the other side is adjustable from 0-400 PSI.
Includes two 1/4″ hose, 90-degree swivel, Push To Connect fittings. -
PC2042 2″ CO2 Bottle and 85 PSI Regulator
$159.9910oz. D.O.T. certified CO2 Bottle with valve and a Single Gauge. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
** OUT OF STOCK ** -
PC2082 2″ CO2 Bottle and 150 PSI Regulator
$169.9910oz. D.O.T. certified CO2 Bottle with valve and a Dual gauge, Adjustable 0-150 psi Regulator. This 2″ diameter bottle is exempt from retesting and does NOT need re-certified every 1 or 5 years.
** OUT OF STOCK ** -
PC750 Electric CO2 Shut Off Valve
$93.99Wires into ignition switch shutting off air supply to air components when not in use. Works with single or dual gauge regulators on low pressure side.
-
PC4000 – AIR COMPRESSOR , 12 Volt
$389.99ELIMINATE YOUR CO2 BOTTLE AND REGULATOR
Mounted in your vehicle, it replaces your CO2 Bottle and regulator. No more filling and maintaining your bottle. Run your Air shifter, Starting Line Controller, Throttle stop and other CO2 / Air devices that operate in the range of 90-120 PSI. This includes most all devices currently used in racing and off road applications.
Includes a “No Kink” Polyurethane coiled hose and tire chuck to maintain your tire pressure, eliminating the need to haul your portable air tank.
Unlike many 12 volt compressors on the market, our customized unit has a 1/4 gallon recovery tank to supply that volume needed to activate many Air devices used in racing.
Compact size, approximately 10″ x 7″ x 4″ and net weight of only 10 lbs.
** OUT OF STOCK ** -
PC2004 CO2 REGULATOR, 85 lb. FIXED PRESSURE w/GAUGE
$84.99Single gauge shows bottle pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
-
PC2008 CO2 REGULATOR, ADJUSTABLE PRESSURE w/DUAL GAUGES
$89.99Dual gauge adjustable 0-150 lb, shows bottle and line pressure. Includes 1/4″ hose quick connect fitting (actual product may vary from image).
-
PC2020 CO2 Bottle, 10 OZ. WITH STANDARD VALVE
$89.99D.O.T. certified lightweight bottle with standard valve. 2″ diameter. “This bottle does NOT need re-certified every 1 or 5 years. The PC2020, 10 oz. CO2 bottle is D.O.T. exempt from periodic retesting.
** OUT OF STOCK **
-
Sale!
PC2030 CO2 BOTTLE, 2.5 LB. WITH STANDARD VALVE
$99.99DOT certified bottle with standard valve. 4 3/8″ diameter.
Quantity limited.
-
PC2022 CO2 BOTTLE, 10 OZ. WITH STRAIGHT VALVE
$89.99DOT certified lightweight bottle with lightweight straight-through valve. 2″ diameter.
** OUT OF STOCK ** -
PC2032 CO2 BOTTLE, 2.5 LB. WITH STRAIGHT VALVE
$129.99DOT certified bottle with straight through valve. 4 3/8″ diameter.
** OUT OF STOCK ** -
PC112 C02 BOTTLE RACKS
$46.49Safely store 2 standard 10 oz. bottles for transport. Non-marring individual bays keep bottles quiet. Measurements: 9″W x 9.5″H x 3.5″D. Weight: 1.2 lbs.(Wall Mount)
-
PC650 10oz CO2 Bottle Replacement Knob
$8.99Replacement knob for new style Sherwood Valve with male rupture disc. Mounting Hole dimensioned for 5/16″ valve stem.
-
PC2015 SHIFNOID STRAIGHT THROUGH VALVE FOR 10 OZ. CO2 BOTTLES
$45.99Replace your heavy V1 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
-
PC2017 SHIFNOID STRAIGHT THROUGH VALVE FOR 2.5 LB. CO2 BOTTLES
$45.99Replace your heavy V4 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.
-
PC2000 PERMA-SEAL CO2 OUTLET SEAL
$4.99Perma-Seal provides a permanent seal for the connection between your CO2 regulator and bottle valve . No more leaks. No more plastic washers. Works with CO2 bottle valves that are internally threaded.
(photo is for example only – sold individually) -
PC2001 CO2 REGULATOR SEALS (pack of 5)
$6.99Replace the worn or missing seal between your CO2 bottle and Regulator (pack of 5).
-
PC1800 CO2 BOTTLE BACKUP AIR FILLER
$19.99Empty CO2 bottle? Ever run out of CO2? Fill your CO2 bottle with compressed air directly from your air tank or air compressor. Designed for the high pressures associated with CO2, this part stays permanently on your regulator, ready for immediate use. This unit eliminates the problems of home built units and the dangers of high pressure. Because your regulator prevents free back flow, trying to fill your bottle from the regulated side will not allow your bottle to fill completely. Putting a standard valve in the high pressure side will result in a dangerous, destroyed valve when you use CO2. This new BACK UP AIR FILLER solves all these problems. Uses your regulator to maintain the preset pressures. Use for unexpected emergencies or full time without last minute bottle or regulator modification. PICTURE SHOWN FOR EXAMPLE ONLY. BOTTLE, REGULATOR and GAUGE NOT INCLUDED.
-
PC550 CO2 BOTTLE MOUNT-BOTTLE TO ROLL BAR
$37.99Billet aluminum mount for standard 2″ diameter 10 oz. CO2 bottle. Mounts to roll bar to fit 1 ¼” to 1 ¾” tubing.
-
PC540 CO2 BOTTLE MOUNT – BOTTLE TO FLAT SURFACE
$69.99For 2.5 lb, 4 3/8″ diameter bottle. Polished CO2 Bottle Mount. Mounts to flat surface.
-
PC310 CO2 / AIR SOLENOID (3-WAY)
$79.4912 or 16 volt, Normally open or normally closed operation. Three 1/8″ NPT ports. One IN, one OUT and one EXHAUST. Manual override button. Power and Ground Lead wires. Used on most CO2 / AIR devices. 125 psi maximum.
-
PC410 CO2 / AIR SOLENOID WITH FLOW CONTROLS (4 WAY)
$134.9912 or 16 volt, Normally open or normally closed operation. Four 1/8″ NPT ports. One IN, two OUT and one EXHAUST. Individual flow controls for each OUT port allow you to contol the rate the air flows. Manual override button. Power and Ground Lead wires. Commonly used on Starting line controls and Throttle Stops. 125 psi maximum.
-
PC315 90 DEGREE SWIVEL FITTING
$8.99¼” pipe to ¼” hose quick connect. (actual product may vary slightly from image).
-
PC300 90 DEGREE SWIVEL FITTING
$8.991/8″ pipe to ¼” hose quick connect (actual product may vary slightly from image).
-
PC290 STRAIGHT FITTING
$7.991/8″ pipe to ¼” hose quick connect. (actual product may vary slightly from image)
-
PC295 STRAIGHT FITTING
$7.99¼” pipe to ¼” hose quick connect.(actual product may vary slightly from image)
-
PC275 “T” 1/4″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99Connect to your CO2 regulator to run two devices on the same bottle.
-
PC280 “T” 1/8″ PIPE TO 1/4″ HOSE QUICK DISCONNECT
$9.99Connect to your CO2 regulator to run two devices on the same bottle.
-
PC125 CO2 LINE KIT
$24.9910 ft of 1/4″ OD high pressure CO2 line with (1) 1/4″ NPT to 1/4″ quick disconnect & (1) 1/8″ NPT to 1/4″ quick disconnect fitting
-
PC130 CO2 LINE
$26.9920′ of 1/4″ OD high pressure line. Designed for use with “Quick Disconnect” fittings.
-
PC100C PRESSURE RUPTURE DISC, FEMALE FOR CO2 BOTTLE VALVE
$19.99Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 13/16″ wrench flats (CHROME). Acceptable replacement for PC100.
-
PC110 PRESSURE RUPTURE DISC, MALE FOR CO2 BOTTLE VALVE
$12.99Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 5/8″ wrench flats.
