CO2 2 SPEED SHIFT KIT FOR B&M PRO STICK OR HURST QUARTER STICK: $109.99
Hands free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 shift. Includes cylinder, solenoid, bracket, airline and fittings (SHIFTER NOT INCLUDED).

CO2, 3 SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B&M PRO STICK OR HURST QUARTER STICK: $309.99
Hands-free automated shifting for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the CO2 operated shifter makes your 1-2 and 2-3 shift. Simple conversion to Shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, CO2 cylinder, handle attachments and adapters, bracket and relay
(SHIFTER NOT INCLUDED) .

CO2 3 SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET: $309.99
Convert your B & M Pro Ratchet to a hands-free automated shifter for accurate and consistent shift points. Extra power, perfect for hard to shift transmissions. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift. Simple circuit prevents accidental activation from park or neutral into gear. Includes cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets.
(SHIFTER NOT INCLUDED)

Available accessories include:
PC2020 - 10 oz CO2 Bottle
PC450 Bottle Mount - Bottle to roll bar
PC520 Bottle Mount - Bottle to flat surface
PC2004 Regulator - 85 lb. Fixed w/Gauge
PC2008 Regulator - Adjustable w/Dual Gauges
NCRPM1000 RPM Activated Switch
NCRPM3000 RPM Activated Switch with Delay
SW7010 Activation Button w/Coil Cord

CO2 3 SPEED SHIFT KIT, STANDARD SHIFT PATTERN FOR B & M PRO RATCHET: $429.99
Convert your B & M Pro Ratchet to a hands-free automated shifter for accurate and consistent shift points. Extra power, perfect for hard to shift transmissions. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift. Included "ULTRA SHIFTER CONTROLLER" prevents accidental activation from high gear into neutral, even if engine returns to shift RPM. Safety Switch prevents inadvertent activation from park or neutral into gear. Includes NC5300 Ultra Shifter Controller, cylinder, solenoid, airline, fittings, safety switch, relays, handle attachment and brackets.
(SHIFTER NOT INCLUDED)

CO2 3 SPEED SHIFT KIT, REVERSE PATTERN, FOR TURBO ACTION CHEETAH SCS SHIFTER: $179.99
Convert your Turbo Action Cheetah SCS Shifter to a hands-free automated shifter for accurate and consistent shift points. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 and 2-3 shift. Includes cylinder, solenoid, airline, fittings, and brackets (SHIFTER NOT INCLUDED).

CO2 2 SPEED SHIFTER: $359.99
The Callis Machine Works (CMW) Shifter is designed for side mounting, ideal for dragsters and roadsters. The shifter includes a pre-mounted SHIFNOID CO2 Cylinder for hands-free automated shifting for accurate and consistent shift points. Built in to the shifter is a neutral safety switch and easy to use, one-handed reverse lockout. Universal cable mount allows the shifter to be used with most shifter cables. Shipped as a standard front cable exit, the shifter is easily converted to a rear cable exit model. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 shift. Includes shifter, cylinder, solenoid, airline and fittings.

CO2 2 SPEED SHIFT KIT FOR B&M PRO BANDIT: $139.99
Hands- free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. Wire into any RPM switch, timer or push button and the cylinder-operated shifter makes your 1-2 shift. Includes cylinder, solenoid, airline and fittings. (SHIFTER NOT INCLUDED)

ALL ELECTRIC 2 SPEED SHIFT KIT FOR MOST 2 SPEED SHIFTERS: $109.99
Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, bracket, and relay.

ALL ELECTRIC 3 SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B&M PRO STICK OR HURST QUARTER STICK: $299.99
Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to B & M Pro Stick or Hurst Quarter Stick Shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay (SHIFTER NOT INCLUDED).

ALL ELECTRIC 3 SPEED SHIFT KIT, STANDARD SHIFT PATTERN FOR B & M PRO STICK OR HURST QUARTER STICK: $269.99
Hands-free automated shifting for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple conversion to B&M Pro Stick or Hurst quarter Stick shifter eliminates the need to squeeze the factory release handle between 2nd and 3rd shift. Simple device prevents accidental activation from park or neutral into gear. Includes solenoid, handle attachments and adapters, bracket and relay (SHIFTER NOT INCLUDED).

ALL ELECTRIC 3 SPEED SHIFT KIT, REVERSE SHIFT PATTERN FOR B & M PRO RATCHET: $299.99
Convert your B&M Pro Ratchet to a hands-free automated shifter for accurate and consistent shift points. No CO2 bottle and regulator needed. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 and 2-3 shift. Simple circuit prevents accidental activation from park or neutral into gear. Includes solenoid, safety switch, relays, handle attachment and brackets. (SHIFTER NOT INCLUDED)

Electric 2 Speed Shifter: $359.99
The Callis Machine Works (CMW) shifter is designed for side mounting, ideal for dragsters and roadsters. The shifter includes a pre-mounted SHIFNOID electric Solenoid for hands-free automated shifting for accurate and consistent shift points. Built in to the shifter is a neutral safety switch and easy to use, one-handed reverse lockout. Universal cable mount allows the shifter to be used with most shifter cables. Shipped as a standard front cable exit, the shifter is easily converted to a rear cable exit model. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes shifter, solenoid and relay.

ALL ELECTRIC 2 SPEED SHIFT KIT FOR B&M PRO BANDIT: $139.99
Hands-free automated shifting for accurate and consistent shift points. Mounts directly to shifter body with no modifications needed. No CO2 bottle and regulator needed. Reduces overall expense and bottle upkeep. Wire into any RPM switch, timer or push button and the solenoid-operated shifter makes your 1-2 shift. Includes solenoid, mount and relay.
(SHIFTER NOT INCLUDED)

ALL ELECTRIC / SPRING SHIFT KIT FOR MOST 2 SPEED SHIFTERS: $119.99
Solenoid / Spring shifter activator. Electric activated shifters give you consistent, hands fee shifting. Low amperage draw, spring activated shift kit for 2 speed transmissions. Mounted to your shifter, the bracket works with B&M ProStick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cable, and Hurst Quarter Stick II with Rear Exit Cable. Connect to your RPM Activated Switch or Timer for reliable shifting.

ALL ELECTRIC 2 SPEED SHIFT KIT, HEAVY DUTY: $139.99
This oversized solenoid produces the extra force necessary for heavy duty applications and hard to shift shifters and transmissions. Ideal for shifters with extra long cables that make them hard to shift. This specialty unit can replace the SN5000FC and SN5000RC if necessary for your application. For 2 speed transmissions using a B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick with Front Exit Cables and Hurst Quarter Stick II with Rear Exit Cable.

5 Step Chip Selector: $69.99
5 RPM settings for endless applications. Use for a high limit, a low limit, burn out limit, shift point during burn out, and shift point down track. Compatible with most ignition systems. Uses plug in style modules. 12 and 16 volt compatible.

RPM Switch: $78.99
Use for a variety of functions such as activating CO2 or electric shifters, Nitrous solenoids, shift lights, timing computers or anything that needs to be activated at a preset RPM. Switch is easily adjusted using optional plug in modules. 12 and 16 volt compatible, and will work with all ignition systems, except Magnetos. 8 cylinder only.

NCRPM4000 - ADJ - A - CHIP: $24.99
Plug in RPM module works with most ignition controls and is adjustable from 1,000 to 11,000 RPM.

Pressure Rupture Disc w / Nut for CO2 Bottle: $12.99
Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 13/16" wrench flats.

Pressure Rupture Disc, Male for CO2 Bottle: $12.99
Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 5/8" wrench flats.

Pressure Rupture Disc, Male for CO2 Bottle: $12.99
Overfilling or heat related over pressurizing may cause original disc to rupture. Have this safety burst disc just in case. 3/8" wrench flats.

CO2 Line Kit: $18.99
10 ft of 1/4" OD high pressure CO2 line with (1) 1/4" NPT to 1/4" quick disconnect & (1) 1/8" NPT to 1/4" quick disconnect fitting.

CO2 Bottle Backup Air Filler: $18.99
Empty CO2 bottle? Ever run out of CO2? Fill your CO2 bottle with compressed air directly from your air tank or air compressor. Designed for the high pressures associated with CO2, this part stays permanently on your regulator, ready for immediate use. This unit eliminates the problems of home built units and the dangers of high pressure. Because your regulator prevents free back flow, trying to fill your bottle from the regulated side will not allow your bottle to fill completely. Putting a standard valve in the high pressuer side will result in a dangerous, destroyed valve when you use CO2. This new BACK UP AIR FILLER solves all these problems. Uses your regulator to maintain the preset pressures. Use for unexpected emergencies or full time without last minute bottle or regulator modification. PICTURE SHOWN FOR EXAMPLE ONLY. BOTTLE, REGULATOR and GAUGE NOT INCLUDED.

Perma-Seal CO2 Outlet Seal: $4.99
Perma-Seal provides a permanent seal for the connection between your CO2 regulator and bottle valve. No more leaks. No more plastic washers. Works with CO2 bottle valves that are internally threaded.

CO2 Regulator, 85 lb. Fixed Press w / Gauge: $64.99
Single gauge shows bottle pressure.

CO2 Regulator, Adjustable Press w/Dual Gauges: $84.99
Dual gauge adjustable 0-150 lb, shows bottle and line pressure.

Dual, Independent Output, Adjustable CO2 Regulator: $229.99
Connect to your CO2 bottle for independently adjustable, dual outputs. Two built in regulators can be set at different pressures to control your CO2 operated devices.   Gauges tell you the bottle pressure and each output pressure. Multiple NPT outlets allow connection of up to four devices.
(BOTTLE NOT INCLUDED -- PATENT PENDING).

• Professional / Sportsman Racing and Industrial applications
• Mounts on most bottle sizes including 7 OZ,  10 OZ,  2.5 LB and larger industrial bottles
• Optional 7 OZ, 10 OZ and 2.5 LB bottles available
• Mounts on your existing V1or V4 Style valve or replace that valve with an optional smaller, lighter weight, flow through valve.
• 2600 PSI max inlet pressure for ultimate safety
• Black anodized, aluminum construction for lighter weight

Dual, Independent Output, Adjustable, COMPENSATING,  CO2 Regulator: $299.00
Connect to your CO2 bottle for independently adjustable, dual outputs. Two built in regulators can be set at different pressures to control your CO2 operated devices.  Cutting edge technology allows for simultaneous activation WITHOUT any pressure fluctuation to multiple devices. Gauges tell you the bottle pressure and each output pressure. Multiple NPT outlets allow connection of up to four devices.
(BOTTLE NOT INCLUDED -- PATENT PENDING).

• Professional / Sportsman Racing and Industrial applications
• Mounts on most bottle sizes including 7 OZ,  10 OZ,  2.5 LB and larger industrial bottles
• Optional 7 OZ, 10 OZ and 2.5 LB bottles available
• Mounts on your existing V1or V4 Style valve or replace that valve with an optional smaller, lighter weight, flow through valve.
• 2600 PSI max inlet pressure for ultimate safety
• Black anodized, aluminum construction for lighter weight

Shifnoid Straight Through Valve For 10 OZ. CO2 Bottles: $38.99
Replace your heavy V1 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.

• 5/8” – 18NS-2 Threads to screw into your 10 OZ Bottle.
• .825” – 14 NGO Outlet threads ( Standard ), to attach any CO2 regulator.
  
  Also available WITH 10 OZ. CO2 Bottle.  Part # PC2022 - $64.99
  

Shifnoid Straight Through Valve For 2.5 Lb. CO2 Bottles: $38.99
Replace your heavy V4 valve with this compact, lightweight valve with shut off knob and pressure rupture disc. Allows you to mount your CO2 Regulator vertically.

• 3/4” – 16NS-2A Threads to screw into your 2.5 LB. Bottle.
• .825” – 14 NGO Outlet threads ( Standard ), to attach any CO2 regulator.
  
  Also available WITH 2.5 LB. CO2 Bottle.  Part # PC2032 - $99.99

 CO2 Bottle, 10 oz: $64.99
DOT certified lightweight bottle with standard valve. 2" diameter.

 CO2 Bottle, 10 oz: $69.99
DOT certified lightweight bottle with lightweight straight through valve. 2" diameter.

 CO2 Bottle, 2.5 lb: $99.99
DOT certified bottle with standard valve. 4 3/8" diameter

 CO2 Bottle, 2.5 lb: $104.99
  DOT certified bottle with lightweight straight through valve. 4 3/8" diameter.

PC3000 Engine Lean Out Kit: $69.99
Ideal for rapid engine warmup, especially Alcohol engines. Connects to your intake with the included "Push to Connect" fittings, Air line and Industrial grade Valve.

Straight Fitting: $7.99
1/8" pipe to ¼" hose quick connect fitting.

Straight Fitting: $7.99
¼" pipe to ¼" hose quick connect fitting.

90 Degree Swivel Fitting: $8.99
1/8" pipe to ¼" hose quick connect fitting.

90 Degree Swivel Fitting: $8.99
¼" pipe to ¼" hose quick connect fitting.

Y-Fitting: $9.99
¼" hose to ¼" hose x 2, quick connect fitting.

T-Fitting: $9.99
¼" hose to ¼" hose x 2, quick connect fitting.

Breather / Vent: $4.99
Use as a muffler or vent. 1/8" pipe threads.

CO2 / Air Solenoid: $59.99
12 or 16 volt, Normally open or normally closed operation. Three 1/8" NPT ports. One IN, one OUT and one EXHAUST. Manual override button. Power and Ground Lead wires. Used on most CO2 / AIR devices.

CO2 / Air Solenoid With Flow Controls: $78.99
12 or 16 volt, Normally open or normally closed operation. Four 1/8" NPT ports. One IN, two OUT and one EXHAUST. Individual flow controls for each OUT port allow you to contol the rate the air flows. Manual override button. Power and Ground Lead wires. Commonly used on Starting line controls and Throttle Stops.

Bottle Mount – Bottle to Flat Surface: $24.99
Surface mount connects 2" diameter CO2 bottle to flat surface.

Throttle Stop / Starting Line Controller w / Easy Adjust Thumb Wheel: $179.99
An easily adjustable throttle stop or starting line controller that allows you to make RPM changes without removing either end of your linkage. A unique thumb wheel adjustment allows easy, reliable adjustments. Solenoid is remote mounted for lighter weight on your linkage. Air line and fittings are included.

Relay 12 Volt 20/30 AMP: $8.99
High current relay actuates accessories that draw high current. 12 volt DC single pole / single throw.

Relay 12 Volt 30/40 AMP: $8.99
High current relay actuates accessories that draw high current. 12 volt DC single pole / single throw.

Transbrake Switch: $14.99
Heavy-duty switch, great for use with throttle stops, transbrakes, and line locks.

Quick Release Transbrake Switch: $29.99
This transbrake switch has a mushroom-style button. A 15/32" hole is required, or the switch can be mounted with bolts.

Transbrake or Line Lock Switch w/ Coil Cord: $42.99
Ideal for steering wheel mounting. Heavy duty, 18 AWG coil cord. Extends to 6 Foot. 15 AMP rating.

Transbrake Switch .03 Delay Adjustable: $64.99
Transbrake switch with extra long adjustable travel. This switch is infinitely adjustable and can delay reaction up to .03. Useful in classes that do not allow delay boxes.

Large Button Transbrake Switch with .03 Adjustment: $73.99
This large button, easy-to-feel switch has an adjustable delay to meet your needs, and it is ideal for classes of racing that prohibit a delay box. Switch allows for up to .03 second delay. A 7/16” hole size is required for mounting.

Power Distribution Block: $24.99
Ideal to connect to your main power supply or ground and distribute to eight stainless steel terminals. 3/8" post. Rated at 48 volts DC. Base is glass filled nylon. Mounting is 2.5" center to center. $24.99

Coil Cord: $22.99
Black 18 gauge, 2 wire for use with one switch. Extends to 6 foot. 15 AMP rating.